5 Tips to Help Maintain Your Sump Pump
Tips To Keep Your Device Working At Peak
A sump pump is extremely helpful when it comes to removing excess water and protecting your property in Wilmington, MA, from flood damage. Much like any other household device, you need to make sure you're taking the proper steps to maintain your pump and keep it working properly for years to come. Check out the following tips to keep your device working at peak efficiency.
1. Remove Debris from the Discharge Pipe.
The discharge pipe works exactly the same as any other pipe in your home; it won't be able to properly pump water if there's debris inside. Regularly check the discharge pipe for obstructions and remove any that you find.
2. Remove Clogs from the Intake Screen.
Your sump pump tends to collect a lot of dirt, gravel and other obstructions as it works. Regularly inspecting the intake screen and removing debris can help keep it running at peak efficiency.
3. Check the Outlet and Cord.
The unit should be plugged into a working ground fault circuit interruptor (GFCI). It's also important to regularly check to make sure that the cord the pump is plugged into is still in good shape.
4. Test the Pump Regularly.
Testing the pump is an important part of proper sump pump maintenance. You can easily do this by pouring a bucket of water in the basin of the device. Watch as the water level rises. The device's float should trigger the machine to activate and drain the excess water.
5. Replace the Pump's Battery.
Some pumps do operate on a backup battery, just in case, the electricity shuts off. Check with the pump's manufacturer to see how often the backup battery needs to be replaced. Most devices require battery changes every two to three years.
Sump Pump maintenance is extremely easy and can help keep your device running properly for years to come. Contact flood remediation experts for professional assistance if your sump pump isn't running properly.